PHYSICAL
Weight: 32.3 kg (71.3 lbs)
Minimum center-to-center distance in side-by-side installation: 660 mm (26.0 in.)
Length (head): 544 mm (21.5 in.)
Length (base): 416 mm (16.4 in.)
Width (base): 290 mm (11.4 in.)
Width (across yoke): 390 mm (15.4 in.)
Height (head straight up): 734 mm (28.9 in.)
Height (maximum): 745 mm (29.4 in.)
DYNAMIC EFFECTS
Color mixing: CMY, independently variable 0-100%
Color wheel: 7 color filters plus open
Gobo animation: Animation wheel, indexing, continuous rotation with variable speed and direction
Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 8 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Framing: Rotatable framing module, +/-60°, with 4 individually controllable full framing blades with variable angle and position.
Prism: 2 rotating/indexing prisms (4-facet circular prism and 6-facet linear)
Frost: Heavy Frost - for wash effects
Color temperature control: Variable 6500 - 2700 K
Electronic dimming: 0 - 100%, four dimming curve options
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Zoom: Motorized
Pan: 540°, coarse & fine control and speed
Tilt: 260°, coarse & fine control and speed
Focus: Motorized
CONTROL AND PROGRAMMING
Control options: DMX
DMX channels: 41
16-bit control: Dimming, CMY, CTO, Zoom, Focus, Pan and Tilt
Setting and addressing: Control panel with backlit LCD display
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
OPTICS
Front lens diameter: 120 mm (4.75 in.)
Zoom range: 6° - 45° (1:7.5)
Light source: 550 W LED engine
Minimum LED lifetime: 20000 hours (to >70% luminous output)*
Binning: Tight color and flux binning
*Manufacturer´s figure obtained under manufacturer´s test conditions
PHOTOMETRIC DATA
Light engine luminous output: 37,000 lumens
LED refresh rate : 3600 Hz
Standard
Fixture luminous output: 19,000 lumens
CRI (Color Rendering Index): >70
CQS (Color Quality Scale): >67
TM-30 Rf (IES TM-30-15 Fidelity Index): >65
TM-30 Rg (IES TM-30-15 Gamut Index): >96
TLCI (Television Lighting Consistency Index): >45
CCT: 6800 K (+/- 250 K)
Peak Luminous Intensity: 1,102,000 cd
With Optional CRI Boost Filter
Fixture luminous output: 13,000 lumens
CRI (Color Rendering Index): >79
CQS (Color Quality Scale): >74
TM-30 Rf (IES TM-30-15 Fidelity Index): >75
TM-30 Rg (IES TM-30-15 Gamut Index): >98
TLCI (Television Lighting Consistency Index): >56
CCT: 6500 K (+/- 250 K)
Peak Luminous Intensity: 783,000 cd
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
CONSTRUCTION
Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP 20
GOBOS
Maximum image diameter: 19.0 mm (0.75 in.)
Gobo material: Borofloat 33
External diameter: 23.0 mm +0 / -0.2 mm (0.906 in. +0 / -0.008 in.)
Maximum gobo thickness: 1.1 mm (0.04 in.)
Coating: Heavy matted aluminum
INSTALLATION
Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets
Location: Dry location only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m (8 in.)
Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
CONNECTIONS
DMX and RDM data in/out: 5-pin locking XLR
AC mains power input.: Neutrik TRUE1 socket, accepts TRUE1 NAC3FX-W (TOP) connector
AC mains power throughput : Neutrik TRUE1 socket, accepts TRUE1 NAC3MX-W (TOP) connector
ELECTRICAL
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 21.8 A
Power Factor: 0.99 @ 120 V , 0.97 @ 230 V
Typical current draw: 6.5 A @ 120 V , 3.2 A @ 230 V *
Power Consumption
Maximum: 856 W
Typical: 778 W *
Idle: 64 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
THERMAL
Cooling: Forced air (temperature regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 0° C
Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
Total heat dissipation (calculated, +/- 10%): 2660 BTU/hr.
ACOUSTIC DATA
Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 46.1 dB(A)
Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 39.1 dB(A)
ENVIRONMENTAL
RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 25.4 lm/W
LWR*: 588 lm/kg (266 lm/lb)
LWR = Lumen-to-Weight Ratio
APPROVALS
Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM
INCLUDED ITEMS
Two omega brackets with 1/4 turn fasteners for rigging clamp attachment: 2 x P/N 91602001
ACCESSORIES
Conversion kits
Framing Module (converts ERA 600 Profile to Performance): P/N 5125849-00
Gobo Wheel 3 Effects Module (converts ERA 600 Performance to Profile): P/N 5131771-00
Optical accessories
CRI Boost Filter (CRI >79, installs on gobo wheel): MAR-91614058
Power input cables
Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.) : P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Power relay cables, 16 A
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Power connectors
Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU
Cable Connector, Neutrik powerCON TRUE1 NAC3MX-W TOP (male): P/N 91611788HU
Installation hardware
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Half-coupler Clamp: P/N 91602005
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
T-shape omega bracket with 1/4 turn, PN 91602008
ORDERING INFORMATION
Martin ERA 600 Performance in cardboard box: P/N 9025122049
Martin ERA 600 Performance – White in cardboard box: P/N 9025122050
Flightcase, two unit, for 2 x ERA 600 Performance / Profile: P/N 91512205